Get a virtual CAN bus set up with ICSim and start identifying traffic with Block Harbor Cybersecurity!

Check us out at: https://blockharbor.io

ICSim: https://github.com/zombieCraig/ICSim

Commands:
sudo apt-get update
sudo apt-get upgrade
git clone https://github.com/zombieCraig/ICSim.git
sudo apt-get install libsdl2-dev libsdl2-image-dev
sudo modprobe can
sudo modprobe vcan
sudo ip link add dev vcan0 type vcan
sudo ip link set up vcan0
cd ICSim
make all
./icsim vcan0
./controls vcan0
candump vcan0
cansniffer vcan0
./icsim -r vcan0
./controls -s [seed] vcan0
./controls -s [seed] -l 2 vcan0